Home > Products > DC Fuse Holder

China DC Fuse Holder Manufacturers, Suppliers, Factory

ADELS® is one of the manufacturers specialized in high quality DC Fuse Holder products in China. Our DC Fuse Holder provides superior protection for residential or commercial solar power systems at competitive prices. DC Fuse Holder applied for PV DC combiner box, inverter etc, with the main function of over-current protection and effective disconnection. Each DC fuse holder has been carefully designed to fit any PV system. With years of experience in manufacturing photovoltaic protection equipment, we know enough to understand market trends and provide superior assistance in creating reliable  DC Fuse Holder.

What’s DC Fuse Holder ?
DC Fuse Holder works on the thermal and electrical properties of the conducting materials. Fuse as an electrical safety device that removes electrical current from an electrical circuit when the current in the electrical circuit is too high. Protect electronic components from overload and short circuit, effectively protect the safety of the solar system circuit.
ADELS focuses on the safety of our DC fuse holder by ensuring its insulation qualities that stops dangerous electrical shorts. We also preserve the quality of our fuse holders when manufacturing them to allow any solar-powered system to run at optimized capacity while using it.
What is DC Fuse Holder can ADELS provide? And what’s the applicants of ADELS DC Fuse Holder?
As one of the manufacturers specializing in the production of photovoltaic modules in China, ADELS focuses on photovoltaic control modules, can provide a variety of voltage DC Fuse Holder to meet the requirements of different photovoltaic systems. Our DC Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it possible to match the busbar mounting in the Photovoltaic (PV) system. We welcome your cooperation!
DC Fuse mainly used in DC combiner box in solar PV systems. When PV panel or imverter caused overload or short circuit, it trip off immediately, to protect PV panels, DC fuse also used to protect other electrical parts in DC circuit, when overload or short circuit. As a short circuit and over-current protector, it is widely used in the high and low voltage distribution system, control system, and electrical equipment.

Which standards do ADELS DC Fuse Holder be made into?
Dc fuse holder is designed and manufactured in accordance with standard IEC60269-1 & IEC60269-6.
What certificates can ADELS provide for DC Fuse Holder?
DC fuse holder and fuse link up to 32A, 1200VDC have CE, TUV & CB certificates. 
How to inquire to ADELS for a quote of DC Fuse Holder?
Adels is ready to provide our best quality DC Fuse Holder to all customers around the world, please contact us freely if you have any enquiry to us:

For 24 hours contact details as below:

Tel.: 0086 577 62797760
Fax.: 0086 577 62797770
Email: [email protected]
Web: www.adels-solar.com.
Cell: 0086 13968753197
WhatsApp: 001396875319
View as  
 
Pv 30a 1000vdc Fuse Holder For Solar System Protection

Pv 30a 1000vdc Fuse Holder For Solar System Protection

ADELS® is a specialized in high quality Pv 30a 1000vdc Fuse Holder For Solar System Protection manufacturer and supplier in China.The ADPV-30 PV 30A 1000V Dc Fuse Holder is specifically designed to provide fast-acting protection under overload current conditions associated with Photovoltaic (PV) systems. ADPV-30 Fuse Holder was designed and manufactured,complying with the standard IEC60269-1, 1EC60269 6.The recommended fuse link size is 10x38mm, which can safely protect 1000VDC Photovoltaic (PV) systems. It applied for PV DC combiner box, inverter etc.1000VDC 30A 10x38mm Solar PV DIN Rail Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it possible to match the busbar mounting in the Photovoltaic (PV) system. ADPV-30 PV 30A 1000V Dc Fuse H......

Read MoreSend Inquiry
Pv 32a 1500vdc Fuse Holder For Solar System Protection

Pv 32a 1500vdc Fuse Holder For Solar System Protection

ADELS® is a specialized in high quality Pv 32a 1500vdc Fuse Holder For Solar System Protection manufacturer and supplier in China.The ADPV-32B 1500VDC 32A 10x58mm PV Fuse Holder is specifically designed to provide fast-acting protection under overload current conditions associated with Photovoltaic (PV) systems. ADPV-30B Fuse Holder was designed and manufactured,complying with the standard IEC60269-1, 1EC60269 6.The recommended fuse link size is 10x58mm, which can safely protect 1500VDC Photovoltaic (PV) systems. It applied for PV DC combiner box, inverter etc.Pv 32A 1500V Dc Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it possible to match the busbar mounting in the Photovoltaic (PV) system. ADPV-30B Pv 32A 1500V Dc Fuse Holder also av......

Read MoreSend Inquiry
High Effective For Lightning Protection Solar Fuse Holder

High Effective For Lightning Protection Solar Fuse Holder

ADELS® is a leading China High Effective For Lightning Protection Solar Fuse Holder manufacturers.
•Rated current:30A (2.5-6mm²)
•Flame class :UL94-V0
•Safety class:II
•Fush specification:1-30A
•Insertion force:≤50N
•Withdrawal force:≥
•Temperature range:40℃ ~85℃

Read MoreSend Inquiry
<1>
As one of the professional China DC Fuse Holder manufacturers and suppliers, we have our own brands. Our high quality DC Fuse Holder is not only provide price list and quotation, but also CE certified. Welcome to our factory to buy customized products.