Ip66 Dc Waterproof Isolator Switch With Air Valve

ADELS® is a professional leader China Ip66 Dc Waterproof Isolator Switch With Air Valve manufacturers with high quality and reasonable price. Welcome to contact us.

Ip66 Dc Waterproof Isolator Switch With Air Valve

•IP66 rated enclosure, UV Resistant
•4x M20 knock holes
•The handle can be padlocked in the “OFF” position
•MC4 plugs can be selected for Convenient connection and space saving
•2 Pole, 4 Poles are aviable (Single/Double String)
•Standard: IEC60947-3, AS60947.3
•DC-PV2, DC-PV1, DC-21B 16A, 25A, 32A, DC1200V
•16A, 25A, 32A, 1200V DC

Ip66 Dc Waterproof Isolator Switch With Air Valve Application

ADELS ELR2 Series DC Isolator Switch in plastic enclosures are applied to l~20 KW residential or commercial photovoltaic system, placed between photovoltage modules and inverters.Arcing time is less than 8ms, that keeps solar system more safe. To ensure its stability and long service life, our products are made by components with optimum quality. Max voltage is up to 1200V DC. It holds a safe lead among similar products.

ELR1 DC Isolator Enclocure, IP66

Ip66 Dc Waterproof Isolator Switch With Air Valve Parameter

Electrical Characteristics
Type	FMPV16-ELR2,FMPV25-ELR2,FMPV32-ELR2
Function	Isolator,Control
Standard	IEC60947-3,AS60947.3
Utilization category	DC-PV2/DC-PV1/DC-21B
Pole	4P
Rated frequency	DC
Rated operational voltage(Ue)	300V,600V,800V,1000V.1200V
Rated operational voltage(le)	See the next page
Rated insulation voltage(Ui)	1200V
Conventional free air themal current(lthe)	//
Conventional enclosed thermal current(lthe)	Same as le
Rated short-time withstand current(lcw)	lkA,ls
Rated impulsed withstand voltage(Uimp)	8.0kV
Overvoltage category	II
Suitability for isolation	Yes
Polarity	No polarity,”+”and”-”polarities could be interchanged
Service life/cycle operation
Mechanical	18000
Electrical	2000
Installation Environment
Ingress protection Enclosure	IP66
Storge temperature	-40°C ~+85°C
Mounting Type	Vertically or horizontally
Pollution degree	3

Rated Voltage / Rated Curren

Wiring	Type	300V	600V	800V	1000V	1200V
2P/4P	FMPV16 series	16A	16A	12A	8A	6A
	FMPV25 series	25A	25A	15A	9A	7A
	FMPV32 series	32A	27A	17A	10A	8A
4T/4B/4S	FMPV16 series	16A	16A	16A	16A	16A
	FMPV25 series	25A	25A	25A	25A	25A
	FMPV32 series	32A	32A	32A	32A	32A
2H	FMPV16 series	35A	35A	/	/	/
	FMPV25 series	40A	40A	/	/	/
	FMPV32 series	45A	40A	/	/	/

Switching Configurations

 

Dimensions(mm)

The ELR1 DC Isolators have been specifically designed to switch Direct Current (DC) at voltages up to 1200Volts. Their robust design and ability to switch such voltages, at rated current, mean that they are ideally suited to be used in the switching of Photovoltaic (PV) systems.

The DC switch achieves ultra-rapid switching through a patented ‘Snap Action’ spring driven operating mechanism. When the front actuator is rotated, energy is accumulated in the patented mechanism until a point is reached at which the contacts are fired open or closed. This system will operate the switch under load within 5ms thereby reducing the arcing time to a minimum.

In order to reduce the chances of an arc propagating, the ELR1 switch employs rotary contact technology. This is designed to make and break the circuit through a revolving double break contact assembly that wipes as it moves. The wiping action has the added advantage of keeping the contact faces clean thereby reducing the circuit resistance and increasing the life of the switch.

The ELR1 boxed DC isolators are manufactured from flame retardant polycarbonate plastic resulting in an extremely strong, reliable, safe switch. They are also supplied in an enclosure which gives plenty of space for cabling.